EQUIPMENT MARKETPLACE
SEARCH MARKETPLACE
SUBSCRIBE
Lupatech Oil & Gas

Lupatech S.A. is comprised of businesses focused primarily on the oil and gas sector, providing equipment and services for production phase, as well as having leadership in Mercosur in the manufacture of industrial valves.

As solutions offered by Lupatech, through companies located in Brazil and abroad, stand out for the high added value. For oil and gas industry are supplied polyester cables (for deep-sea and deep-sea platform anchoring), wide valve line, tools to complete the wells, special coatings for pipes, gas compressors, fiber optic monitoring systems, in addition general services in platform. In addition to its business, Lupatech operates in the production and sale of industrial valves, with emphasis on petrochemicals, chemistry, paper and cellulose, food, pharmaceutical, steelworks, among others.

Lupatech's value creation in the market is also the result of the awareness that an organization is an integral part of a complex ecosystem and that a perpetuity of the company and your evolution depend on the quality of the relationship with all its publics and special attention on preservation and improvement of the environment.

Company Location:
Lupatech Oil & Gas
Estrada da Pedreira Jundiá n°50 - Iboassica
Macaé     27925-530
Brazil
Contact Details:
Central Energy
Phn: +55 22 3311-5500
Fax: +55 22 3311-5500

19 ads found    Page 1 of 1

For Sale: Rig Tong
RIG TONG, CAP.: 35 - 75ton. Rang: 3.1/2" a 8.1/4";4.1/2" a 5.5/8"; 5" a 9" Manufacturer: COTEMA. Contact central.energy@lupatech.com.br...
Location: Macaé - Rio de Janeiro Date Posted: Friday, August 11, 2017
Condition: used Price: Price Upon Request
view details
For Sale: Offshore Workover Rig
CABOT OCEAN EXPLORER ROTATING WORKOVER AND SERVICE RIG FOR OFFSHORE WORK Comprising Telescoping derrick with 102 ft, capacity 250,000 lbs. Traveling block McKissick, model 864, capacity 150 ton. Mounted on unitized machinery basis and master structure specially designed for operation on offshore oil production platforms. Drawworks Cabot Model 2042 developing 41,000 lbs powered by two Detroit Diesel Engines 8V-71N-65 each one with Transmission Allison CLT 750, Compounded manufacturer Cabot Model 650A. Rotary table Skytop/ Brewstep model RSH-18, capacity 200 ton. The rig has specially designed structural components to accommodate the geometry and load bearing eccentricities of the several fixed platforms, designed to work on 20 and 45 ft skid beam spacing. Special system of light capacity hydraulic jacks to slide on both directions the rig in order to cover longitudinal and transverse rows of wells. Explosion proof electrical system with Generator type SER, 120 kW – 220 Vac. Well control circulating and fluid systems BOP RAM Cameron Model “U” double, size 11” x 5000 psi, BOP Annular Cameron model “D”, size 11”x5000 psi; Hydraulic power tong Eckel Model 5.1/2” UHT HS - Model B. Triplex Pumping Unit Halliburton model HT-400, Plunger: 4.1/2" x 8", engine 8V-71N. Two auxiliary winch Branden model PD 12C....
Location: Macaé - Rio de Janeiro / Brazil Date Posted: Friday, August 11, 2017
Condition: Good - Used Price: Price Upon Request
view details
For Sale: Elevators
Single Joint Elevator NU- 7/8"; 1.9"; 3.1/2"; 2.7/8"; 1.66";2.3/8"; 4.1/2"; EU- 2.7/8"; 3.1/2"; 2.3/8"; 4.1/2"; 1.66" BTC- 5.1/2"; 6.5/8"; 7"; Elevator HYC- 3.1/2"; 4.1/2"; 5"; 5.1/2". Elevator Center Latch- 6.5/8"; 7"; 4.1/2"; 3.1/2"; 5.1/2"; Elevator Spider- 7.5/8"; 6.5/8"; 5"; 5.1/2"; 4.1/2"; Contact central.energy@lupatech.com.br ...
Location: Macaé - Rio de Janeiro Date Posted: Tuesday, July 04, 2017
Condition: used Price: Price Upon Request
view details
For Sale: Coiled Tubing BHA Tools
Follows the example of some tools: C.A.R.S.A.C HT CONNECTOR FT 1.5" EXTERNAL CONNECTOR FT 1.5" PCE TUBING END LOCATOR : RANGE (2.7/8" to 3.1/2"); (3.1/2" to 4.1/2"); (4" to 5"); (5.1/2"" to 6.5/8") INTEX TOOL FLOW ACTIVADE "GS" RUNNING/PULLING TOOL 2"; 3". HYDRAULIC DISCONNECT OD 1 1/2" VENTURI JUNK BASKET PULLING TOOL HID HJPT JDC 2"; 2.1/2"; 3" For further information/ other tools please contact us. central.energy@lupatech.com.br ...
Location: Macaé - Rio de Janeiro Date Posted: Friday, June 30, 2017
Condition: Used and New Price: Price Upon Request
view details
For Sale: COILED TUBING ACCESSORY - Liftchain Serie Air Chain Hoists
• 03 unit- Liftchain Serie Air Chain Hoists (Model LCA 120 D) manufactured by Ingersoll Rand. Rated capacity 12 tons with 2 load chain falls. Chain bucket for 50 m of chain. Hook stroke 25m. Pressure operating 90 psi. • 02 unit- Liftchain Serie Air Chain Hoists (Model LC2A120D) manufactured by Ingersoll Rand. Rated capacity 12 tons with 2 load chain falls. Chain bucket for 50 m of chain. Hook stroke 25m. Pressure operating 90 psi. Contact central.energy@lupatech.com.br...
Location: Macaé - Rio de Janeiro Date Posted: Tuesday, June 27, 2017
Condition: Used in Good Maintenance Price: Price Upon Request
view details
For Sale: REEL & STRING EQUIPMENT COILED TUBING
• 01 unit – Coiled Tubing Reel – Hydra Rig (Model D3000 DID REEL) – TAG 1842/93102 UF-06.1 – With string FT. String 36614 FT 1.75” (HS-90-C)- Length: 21817,94ft - Manufactured by Tenaris. This string never had been worked in oil and gas well. • 01 unit – Coiled Tubing Reel – Stewart Stevenson (Model RS-68-C) – TAG RS686040752010509 UF 02.1– With string FT. String 36613 FT 1.75” (HS-90-C)- Length: 21747,93ft - Manufactured by Tenaris. This string never had been worked in oil and gas well. • 01 unit – Coiled Tubing Reel – Hydra Rig (3015) – TAG 1841/93093 UF-05.1 – With String FT. String 1969 FT 1.50” (GT-90) - Length: 20347,77ft - Manufactured by Global. • 01 unit – Coiled Tubing Reel – Hydra Rig (Model D3000 DID REEL) – TAG 1842/93103 UF-06.2– With string FT. String 5665 FT 1.75” (GT-90)- Length: 20729,00ft - Manufactured by Global. • 01 unit – Coiled Tubing Reel – Hydra Rig (Model D3000 DID REEL) – TAG 302443-2 UF-01.2 – With string FT. String 41184 FT 1.50” (QT-1000 HP)- Length: 23566,27ft - Manufactured by Quality (NOV). • 01 unit – Coiled Tubing Reel – Stewart Stevenson (Model RS-68-C) – TAG HP-02– With string FT. String 41186 FT 1.50” (QT-1000 HP)- Length: 21610,89ft - Manufactured by Quality (NOV). • 01 unit – Coiled Tubing Reel – Hydra Rig (Model 3015) – TAG 1841/93094 UF-05.2. • 01 unit – Coiled Tubing Reel – Hydra Rig (Model D3000 DID REEL) – TAG 302443-1 UF 01.1. • 01 unit – Coiled Tubing Reel – Stewart Stevenson (Model RS-68-C) TAG RS686040752040509 /UF-03.1 • 01 unit – Coiled Tubing Reel – Stewart Stevenson (Model RS-68-C) TAG RS686040752030509. /UF-03.2 • 01 unit – String 5666 FT 1.75” (GT-90)- Length: 15042,65ft - Manufactured by Global. Contact central.energy@lupatech.com.br ...
Location: Macaé - Rio de Janeiro Date Posted: Tuesday, June 27, 2017
Condition: Used and New Price: Price Upon Request
view details
For Sale: Power Tong MCCOY CLINCHER
Qty: 10 Kits Power Tong MCCOY CLINCHER® Model: CLE7625UHT Casing Tong Size Range: 2.375” - 7.625” Torque Low Gear: 30,000 ft.lbs. @ 9 RPM Torque High Gear: 3,500 ft.lbs. @ 69 RPM All RPM based on 65 GPM Flow Rate Weight with backup: 3,500 lbs. Jaws and Dies: Wrap around or Dovetail jaws –– Low Friction jaws available Wrap around or Dovetail jaws –– Fine Tooth Steel, GRITFACE® or Aluminum. Jaws range: 2.1/6" to 4.1/2" (Steel) 4.1/2" to 7.5/8" (Steel) 2.1/6" to 4.1/2" (Chrome) 4.1/2" to 7.5/8" (Chrome) Dies(Chorme and Steel) range: 2.7/8"; 3.1/2"; 4"; 4.1/2"; 5"; 5.1/2"; 6"; 6.5/8"; 6.7/8"; 7"; 7.5/8" DIESEL POWER UNITS Model: DPU660 Engine: Deutz 6 Cylinder Air Cooled Engine BHP: 114 HP @ 2,300 RPM Hydraulic Pump: 2 Stage Gear, Vane, Piston Hydraulic Output (LP): 60 GPM @ 1,400 psi Hydraulic Output (HP): 30 GPM @ 3,000 psi Hydraulic Filtration: 5 Micron Catridge Style Hydraulic System: Open or Closed Starter Type: Air Power Starter, Electrical Option Engine Throttle System: On Demand, Manual, or Pneumatic Shutdown System: Automatic and Manual Remote Instrumentation: Engine Temperature, Oil Pressure Hydraulic Reservoir: 140 Gallons Diesel Fuel Capacity: 42 Gallons Overall Length: 102.000” Overall Width: 48.000” Overall Height: 62.750” Overall Weight with Hydraulic Oil: 7,250 lbs.s WINCATT - Analysis system of graphs generated with torque x turns and torque x time, with switch box converting hydraulic pressure into signal, generating reports in pdf. Contact central.energy@lupatech.com.br ...
Location: Macaé - Rio de Janeiro Date Posted: Monday, June 26, 2017
Condition: Used in Good Maintenance Price: Price Upon Request
view details
For Sale: WPCE’S EQUIPMENT FOR WP 15 KPSI
02 unit - BOP 15 Kpsi (Model ES46-N469XL) - ID 4.06"; upper connection 4.06 10M BX 155 STUDDED; Lower connection 4.06 10M BX 155. Both ready to work with 1.50” Tubing Size. 01 unit - Stripper 15 Kpsi (Model DSA6 S/D) - ID 4.06" Side Door Dual; upper connection Interface with Injector Head HR660; Lower connection 4.06 10M BX 155. Ready to work with 1.50” Tubing Size. 01 unit - Stripper 15 Kpsi (Model DSA6 S/D) - ID 4.06" Side Door Single; upper connection Interface with Injector Head HR660; Lower connection 4.06 10M BX 155. Contact central.energy@lupatech.com.br...
Location: Macaé - Rio de Janeiro Date Posted: Friday, June 23, 2017
Condition: New Price: Price Upon Request
view details
For Sale: ZONE II HPOL COILED TUBING UNIT (HYDRA RIG)
WPCE’S EQUIPMENT FOR WP 10 KPSI 02 unit- BOP 10 Kpsi (Model EH44-NA39XL) - ID 4.06"; upper connection 4.06 10M BX 155 STUDDED with 4.06 10M JU Hydraconn (Model JU44-1445L) Installed; Lower connection 4.06 10M BX 155 With CB 44 Union Installed. Both ready to work with 1.75” Tubing Size. 02 unit- Stripper 10 Kpsi (Model DSA4) - ID 4.06" Side Door; upper connection Interface with Injector Head HR660; Lower connection CB 44 Union. Both ready to work with 1.75” Tubing Size. INJECTOR 02 unit- Hydra Rig Injector (Model HR660) Rated Tubing Pull: Low Gear 60.000 lb / High Gear 32.000 lb. Rated Snubbing Force: Low Gear 30.000 lb. Tubing Sizes 1.00 in to 2.375 in. One Injector assembled with 60” Gooseneck and 72” Gooseneck. Both ready to work with 1.75” Tubing Size. POWER PACK 02 unit- Hydra Rig Power Pack (Model CE182173 - Open Loop/High Pressure). Engine CAT 3406C 490 BHP and Gross Power 2100 rpm. With 07 Hydraulic Pumps ( Injector 90 gpm/4750 psi, Reel 29.75 gpm/2500psi, Levelwind 14.6 gpm/2500 psi, BOP 29.75 gpm/3000 psi, Auxiliary 32 gpm/3000 psi, Priority 17.5 gpm/3000 psi) CONTROL CABIN 02 unit- Hydra Rig Control Cabin (Model CD202207 - ZONE II 301). X-OVER and lubricator • 05 unit - Well Head X-Over (Surface Flow Tree - 8.1/4'' Acme (04 FFP) x CB-44 – For Surface flow tree WP 5.000 PSI (04 FPP)) • 06 unit - Well Head X-Over (4.7/8'' Stub Acme Pin (6 FPP) x CB-44 (04 FPP) • 04 unit - Well Head X-Over (4.7/8'' Stub Acme (06 FPP) x 4.1/2'' EU (08 FPP)) • 02 unit - Well Head X-Over (Surface Flow Tree - 8.1/4'' Stub Acme (06 FPP) x CB-44 - For Surface flow tree WP 10.000 PSI (04 FPP)) • 06 unit - Well Head X-Over (RISER CB-44 FEMALE (04 FPP) X CB-44 MALE (04 FPP) Lengthen 1,80m • 01 unit - Well Head X-Over (RISER CB-44 FEMALE (04 FPP) X CB-44 MALE (04 FPP) Lengthen 3,10m) • 01 unit - Well Head X-Over (FLANGE 4.1/16 WP 15.000 psi (08 holes) X FLANGE WP 10.000 psi (08 holes)) • 01 unit - Well Head X-Over (4.1/2" EU X CB-44 FEMALE) Contact central.energy@lupatech.com.br ...
Location: Macaé - Rio de Janeiro Date Posted: Thursday, June 22, 2017
Condition: Used in Good Maintenance Price: Price Upon Request
view details
For Sale: ZONE II NITROGEN PUMPING (HYDRA RIG)
05 unit - 180K Non-Fired Nitrogen Pumping Skid DNV 2.7-3 Certified Zone II. Engine CAT 3406C 490 BHP and Gross Power 2100 rpm. With 04 Hydraulic Pumps (Nitrogen Pump Hydrostat 100 gpm/5500 psi, Heat Builder 90 gpm/5000psi, Coolant Hydraulic Pump 15 gpm/2500 psi, Boost Hydraulic Pump 10 gpm/2500 psi). All units with cold end bore 1.625 in. pumping at range 300 scfm to 3000 scfm with Working pressure 10k psi. Contact central.energy@lupatech.com.br...
Location: Macaé - Rio de Janeiro Date Posted: Thursday, June 22, 2017
Condition: Used in Good Maintenance Price: Price Upon Request
view details
For Sale: Cryogenic Tank ISO Pack 2000
QTY: 25 tank- Manufacturing Wessington Cryogenics The World Leading ISO PACK offshore cryogenic tank is the product of choice for well service companies all around the World. Designed to be transported either individually or in pairs (coupled together) as one 20ft ISO unit, this configuration allows for the tanks to be shipped on standard container ships anywhere in the world, by the most economical method. This T75 UN tank has approvals for road, rail & sea transport. It also has CSC with DNV 2.7-1 and EN 12079 approvals among many other options, and is designed, manufactured / tested for storing & transporting liquid nitrogen, argon and oxygen, and can often be seen on offshore supply vessels being transported to oil production platforms all over the world. The ISO PACK also features high vacuum super-insulation. Special features include: • Lower roof plate to allow stacking with slings/shackles remaining in situ • Dual try-cock valves • Fully welded frame or optional removable frame • Optional Hasting vacuum check valve Specification ISO PACK 2000 3.1 Bar ASME Capacity (Ltr) Gross 7,730 Pressure 3.1 Bar Tare Weight kg 5,100 Max Gross Weight (LN2) kg 11,033 Contact central.energy@lupatech.com.br ...
Location: Macaé - Rio de Janeiro Date Posted: Thursday, June 22, 2017
Condition: Used in Good Maintenance Price: Price Upon Request
view details
For Sale: COILED TUBING UNIT (STEWART STEVENSON)
POWER PACK AND CABIN 03 unit- Model TS-80-SSI Skid-Mounted Coiled Tubing Unit. Engine Detroit 60 Series 350 BHP and Gross Power 2100 rpm. With 02 Hydraulic Pumps (Injector – Axial Piston, Closed Loop, 7.93 CID 6000 psi, Main Circuit Pressure Compensating, Open Loop, 7.93 CID 3300 psi). Also included the Hose Reel to make interface with others assemblies ( Injector, BOP and Reel). WPCE’S EQUIPMENT FOR WP 10 KPSI 03 unit- BOP 10 Kpsi (Model EH44-NA39XL) - ID 4.06"; upper connection 4.06 10M BX 155 STUDDED with 4.06 10M JU Hydraconn (Model JU44-1445L) Installed; Lower connection 4.06 10M BX 155 With CB 44 Union Installed. Ready to work with 1.50” Tubing Size. 03 unit- Stripper 10 Kpsi (Model DSA4) - ID 4.06" Side Door; upper connection Interface with Injector Head Model 800 Series; Lower connection CB 44 Union. Ready to work with 1.50” Tubing Size. INJECTOR 03 unit- Injector (Model 800 Series) Rated Tubing Pull: Low Gear 80.000 lb / High Gear 22.000 lb. Rated Snubbing Force: Low Gear 40.000 lb. Tubing Sizes 0.75 in to 2.875 in. Injector assembled with Gooseneck 90” radius. Ready to work with 1.50” Tubing Size. Contact central.energy@lupatech.com.br...
Location: Macaé - Rio de Janeiro Date Posted: Thursday, June 22, 2017
Condition: Used in Good Maintenance Price: Price Upon Request
view details
For Sale: Advanced Tension Frame 350 MT
1 unit - Advanced Tension Frame. Design capacity 350 MT according to API 8C. This Specification contains functional design specifications, manufacturing and testing criteria for an Advanced Coiled Tubing Tension Frame. The tension frame shall facilitate safe and efficient coiled tubing and wire line operations in a completion / work over system. The ATF is optimized for Coiled Tubing operation, with ability to skid coil tubing injector, strippers and BOP aside, for rigging up Wire line in parallel. The ATF is designed according to API8C with a design capacity of 350 MT, where 350MT is the maximum hang-off load connected to the top drive during normal operation. • 1 unit – Transport Basket DNV 2.7-3. • 1 unit - Control Panel. • 1 unit – Insert size from 3 1/2” to 10” - 90 DEG and 18 DEG. • 1 unit - Hang Off Spool 7.1/16" 10k x 7.1/16" 10k. • 1 unit - Hang Off Spool 11" 10k x 7.1/16" 10k. • 1 unit - Lifting Bar. • 1 unit - Lifting Plate. • 1 unit - 5.1/2" Lifting Sub. • 2 unit - HPU( Hydraulic power Unit). Pressure 207 BAR; Flow 130 l/min; DNV 2.7.1 Approved Frame; ATEX zone 2 IIA T3 Diesel engine. • 10 unit - 18 degree sleeve: 6.5/8"(2 unit); 7"(1 unit); 4"(1 unit); 5.1/2"(3 unit);7.5/8"(1 unit); 6.5/8"(1 unit); 5"(1 unit); 6"(1 unit). • 4 unit - 90 degree sleeve: 7.5/8"; 4"; 8"; 6". ...
Location: Macae - Rio de Janeiro Date Posted: Wednesday, June 14, 2017
Condition: Good Price: Price Upon Request
view details
For Sale: Advanced Tension Frame 350 MT
• 1 unit - Advanced Tension Frame. Design capacity 350 MT according to API 8C. This Specification contains functional design specifications, manufacturing and testing criteria for an Advanced Coiled Tubing Tension Frame. The tension frame shall facilitate safe and efficient coiled tubing and wire line operations in a completion / work over system. The ATF is optimized for Coiled Tubing operation, with ability to skid coil tubing injector, strippers and BOP aside, for rigging up Wire line in parallel. The ATF is designed according to API8C with a design capacity of 350 MT, where 350MT is the maximum hang-off load connected to the top drive during normal operation. • 1 unit – Transport Basket DNV 2.7-3. • 1 unit - Control Panel. • 1 unit – Insert size from 3 1/2” to 10” - 90 DEG and 18 DEG. • 1 unit - Hang Off Spool 7.1/16" 10k x 7.1/16" 10k. • 1 unit - Hang Off Spool 11" 10k x 7.1/16" 10k. • 1 unit - Lifting Bar. • 1 unit - Lifting Plate. • 1 unit - 5.1/2" Lifting Sub. • 2 unit - HPU( Hydraulic power Unit). Pressure 207 BAR; Flow 130 l/min; DNV 2.7.1 Approved Frame; ATEX zone 2 IIA T3 Diesel engine. • 8 unit - 18 degree sleeve: 5"(4 unit); 4.1/2"(1 unit); 6.5/8"(2 unit); 5.1/2"(1 unit). • 4 unit - 90 degree sleeve: 7"; 4.1/2"; 5"; 6.5/8". ...
Location: Macaé - Rio de Janeiro Date Posted: Monday, June 12, 2017
Condition: Good Price: Price Upon Request
view details
For Sale: Advanced Tension Frame 350 MT
• 1 unit - Advanced Tension Frame. Design capacity 350 MT according to API 8C. This Specification contains functional design specifications, manufacturing and testing criteria for an Advanced Coiled Tubing Tension Frame. The tension frame shall facilitate safe and efficient coiled tubing and wire line operations in a completion / work over system. The ATF is optimized for Coiled Tubing operation, with ability to skid coil tubing injector, strippers and BOP aside, for rigging up Wire line in parallel. The ATF is designed according to API8C with a design capacity of 350 MT, where 350MT is the maximum hang-off load connected to the top drive during normal operation. • 1 unit – Transport Basket DNV 2.7-3. • 1 unit - Control Panel. • 1 unit – Insert size from 3 1/2” to 10” - 90 DEG and 18 DEG. • 1 unit - Hang Off Spool 7.1/16" 10k x 7.1/16" 10k. • 1 unit - Hang Off Spool 11" 10k x 7.1/16" 10k. • 1 unit - Lifting Bar. • 1 unit - Lifting Plate. • 1 unit - 5.1/2" Lifting Sub. • 2 unit - HPU( Hydraulic power Unit). Pressure 207 BAR; Flow 130 l/min; DNV 2.7.1 Approved Frame; ATEX zone 2 IIA T3 Diesel engine. • 9 unit – Slip insert 18 degree: 10" (1 unit); 8"(1 unit); 5.7/8" (1 unit); 5.1/2" (1 unit); 3.1/2" (1 unit); 9.5/8" (2 units); 5" (1 unit); 6.5/8" (1 unit). • 6 unit – Slip insert 90 degree: 10"; 5.7/8"; 3.1/2"; 5.1/2"; 8.5/8"; 9.5/8". ...
Location: Macaé - Rio de Janeiro Date Posted: Monday, June 12, 2017
Condition: Good Price: Price Upon Request
view details
For Sale: Offshore Slick Line Kit 15 Kpsi
1 UNIT - SLICK LINE – MODEL SLIMLINE 6931035300V01 WPCE’S EQUIPMENT FOR WP 15 KPSI 1 unit- Bop 15 Kpsi - ID 4.1/2in upper connection Ø9.1/2in Elmar box; Lower connection Ø9.1/2in Elmar pin. 4 units- Lubricator 15 kpsi - ID 4.1/2" Length 10'; upper connection Ø9.1/2" - 4 Elmar box; Lower connection Ø9.1/2" - 4 Elmar pin. 1 unit- Lubricator 15 kpsi - ID 4.1/2" Length 5' upper connection Ø9.1/2" - 4 Elmar box; Lower connection Ø9.1/2" 4 thd Elmar pin 1 unit- Quick Test Sub 15 Kpsi - Ø4.1/2" 1 unit- Block Y 15 Kpsi - 4.1/16" 1 unit- Tool Catcher 15 Kpsi - 1" x 1.3/4" 2 unit- Stuffing Box 15 kpsi - 6.1/4" 1 unit- Stuffing Box Sheave 15k - 6.1/4" 2 unit- Test CAP 15 Kpsi - (Combined Lifting Bail and Test Plug Assembly) 6.1/4" with cap 9/16" AEHP 1 unit- Test CAP 15 Kpsi - (Combined Lifting Bail and Test Plug Assembly) 9 .1/2" - 4 Emar with cap 9/16" AEHP 1 unit- LIFT BAIL/TEST PLUG 15Kpsi - 9.1/2" 1 unit- Test CAP 15 Kpsi - 6.1/4"-4thd with cap 9/16" AEHP 1 unit- Test CAP 15 Kpsi - 9.1/2" - 4 thd Emar with cap 9/16" AEHP 1 unit- Cross Over Stub acme 15K - 9.1/2" thd Emar cx 4.7/8" stub acme ID (3") 1 unit- Cross Over 15K - 9.1/2" - 4thd x 6.1/4" ID (4") 1 unit- Lubricator dolly - 7.7/16" 1 unit- Stuffing Box Sheave 16". 2 unit- Composite Slickline Floor Sheave 16" 4 unit- Pump Enerpac: One pump of each range: 3 Kpsi; 6,5 Kpsi; 10 Kpsi; 15 Kpsi 4 unit- Hose: - 1/4" 30 kPsi with 7,75 meters (1 unit); 1/4" 6 Kpsi with 1,71meters (2 unit); 1/4" 10 Kpsi with 7,75meters (1 unit) SLING • 1 unit- Two-legged sling with 1.50 meters to BOP’s cage • 1 unit- Two-legged sling with 5.50 meters for WPCE of 15K • 1 unit- Two-legged sling with 2.50 meters BHA EQUIPMENT • 19 unit- Stem/Sinker Bars 1.1/2" X 2', 1.1/2" X 3', 1.1/2" X 5', 1.7/8" X 2', 1.7/8" X 5', 2.1/8“ X 2’ , 2.1/8“ X 3’, 2.1/8“ X 5’, 1.7/8" X 3', 2.1/8“ X 2’ • 2 unit- Hydrostatic Bailer 1.500", 2.125" • 2 unit- Dump Bailers 1.500", 2.125", 2.620". • 2 unit- Fluted Centralizers OD 2.72" - DN 3", 3.54" - DN 4", OD 2.72" - DN 3" ,OD 3.54" - DN 4" • 13 unit- Lead Impression Blocks 1.500 ",1.750", 2.000", 2.250",2.500", 2.625", 2.750"2.875", 3.250", 3.500", 3.593", 4.750". • 4 unit- Tubing Gauge Cutters 1.900", 2.220", 2.750", 3.460" • 15 unit- Knucke Joints 1.1/2" , 1.7/8" ,2.1/8" . • 11 unit- Blind Boxes 1.625", 1.750", 2.000", 2.250", 2.625", 2.750", 2.860", 3.250", 3.500",3.593", 3.780", 3.850". • 6 unit- Bowen Tubular Jars 1.1/2" X 30", 1.7/8" X 30", 2.1/8" X 30",1.1/2" X 30". • 4 unit- Running & Pulling Tool: GS 2", GS 2.1/2", GS 3" ( core w/ thread 1.1/16" UNSI), GS 3 1/2", GS 4". • 2 unit- Sliding Sleeve with no go: 3.62" (nipple 3.56")- 4 m x ID 3", 3.72". (nipple 3.68") 4 m ID 3" . • 10 unit- Slips GS 2.00",GS 2.50", GS 3.00, GS 3.00", GS 3.50",GS 4.00". • 1 unit- Wireline Scratchers 1.1/2" (With wire holes 0.092"). • 3 unit- Cross Over1.1/16" UNS pin X 1.7/8''" QLS box • 3 unit- Cross Over1.1/2" QLS pin X 15/16" UNS CX. • 1 unit- Cross Over 1.1/2" QLS pin X 1.7/8" QLS CX. • 3 unit- Cross Over 1.7/8" QLS pin X 1.1/16" UNS CX. • 1 unit- Cross Over 1.7/8" QLS pin X 1.1/2" QLS CX. • 3 unit- Cross Over 15/16" UNS pin X 1.1/16" UNS CX. • 2 unit- Shock Absorbers 1.7/8", 2-18". ...
Location: Macaé - Brazil Date Posted: Thursday, June 08, 2017
Condition: New Price: Price Upon Request
view details
For Sale: Offshore Slick Line Kit 5 Kpsi
8 UNIT SLICK LINE – MODEL SLIMLINE 6931035300V01 WPCE’S EQUIPMENT FOR WP 5 KPSI • 8 units - Bop 5 Kpsi - ID 5.1/8"; upper connection Ø8.1/4" - 4 Elmar box; Lower connection Ø 8.1/4" – 4 Elmar pin. • 8 units - Lubricator 5 kpsi - ID 5.1/8" Length 20'; upper connection Ø6.1/8" - 4 Elmar box; Lower connection Ø8.1/4" - 4 Elmar pin. • 5 units - Lubricator 5 kpsi - ID 5.1/8" Length 8' upper connection Ø 8.1/4" - 4 Elmar box; Lower connection Ø 8.1/4" 4 thd Elmar pin • 8 units - Sub Test 5 Kpsi - Ø 4.1/16" • 8 units - Quick Test Sub 5 Kpsi - Ø 5.1/8" • 8 units- Test CAP 5 Kpsi - Upper Test CAP (Quick Teste Plug / Lift Bail) Ø 8.1/4"- 4 Elmar box. • 8 units- Test CAP 5 Kpsi - Lower Test CAP (With NPT 1/2 ") Ø 8.1/4"-4 Elmar box. • 13 units- Lubricator dolly – Qtd 8 unit of Ø 5.1/8" and 5 units of Ø4.1/16" • 8 units- Stuffing Box Sheave 16". • 16 units- Composite Rigging Sheave 16" • 32 units- Pump Enerpac: Qtd: 8 units of 3 Kpsi; 19 unit of 6,5 Kpsi; 5 units of 10 Kpsi; • 26 units- Hose – Qtd. 7 units of 1/4" 6 Kpsi with 1,71meters; 19 units of 1/4" 10 K psi with 7,75meters SLING • 7 units- Two-legged sling with 5.50 meters • 5 units- Two-legged sling with 2.50 meters • 19 units- Swivel of 5 ton. BHA EQUIPMENT • 152 units- Stem/Sinker Bars 1.1/2" X 2', 1.1/2" X 3', 1.1/2" X 5', 1.7/8" X 2', 1.7/8" X 5', 2.1/8“ X 2’ , 2.1/8“ X 3’, 2.1/8“ X 5’, 1.7/8" X 3', 2.1/8“ X 2’ • 16 units- Hydrostatic Bailer 1.500", 2.125" • 22 units- Dump Bailers 1.500", 2.125", 2.620". • 16 units- Fluted Centralizers OD 2.72" - DN 3", 3.54" - DN 4", OD 2.72" - DN 3" ,OD 3.54" - DN 4" • 104 units- Lead Impression Blocks 1.500 ",1.750", 2.000", 2.250",2.500", 2.625", 2.750"2.875", 3.250", 3.500", 3.593", 4.750". • 32 units- Tubing Gauge Cutters 1.900", 2.220", 2.750", 3.460" • 115 units- Knucke Joints 1.1/2" , 1.7/8" ,2.1/8" . • 89 units- Blind Boxes 1.625", 1.750", 2.000", 2.250", 2.625", 2.750", 2.860", 3.250", 3.500",3.593", 3.780", 3.850". • 48 units- Bowen Tubular Jars 1.1/2" X 30", 1.7/8" X 30", 2.1/8" X 30",1.1/2" X 30". • 40 units- Running & Pulling Tool: GS 2", GS 2.1/2", GS 3" ( core w/ thread 1.1/16" UNSI), GS 3 1/2", GS 4". • 16 units- Sliding Sleeve with no go: 3.62" (nipple 3.56")- 4 m x ID 3", 3.72". (nipple 3.68") 4 m ID 3" . • 80 units- Slips GS 2.00",GS 2.50", GS 3.00, GS 3.00", GS 3.50",GS 4.00". • 8 units- Wireline Scratchers 1.1/2" (With wire holes 0.092"). • 8 units- Cross Over1.1/16" UNS pin X 1.7/8''" QLS box • 16 units- Cross Over1.1/16" QLS pin X 15/16" UNS CX. • 24 units- Cross Over1.1/2" QLS pin X 15/16" UNS CX. • 5 units- Cross Over 1.1/2" QLS pin X 1.7/8" QLS CX. • 24 units- Cross Over 1.7/8" QLS pin X 1.1/16" UNS CX. • 5 units- Cross Over 1.7/8" QLS pin X 1.1/2" QLS CX. • 24 units- Cross Over 15/16" UNS pin X 1.1/16" UNS CX. • 15 units- Shock Absorbers 1.7/8", 2-18". ...
Location: Macaé - Rio de Janeiro Date Posted: Thursday, June 08, 2017
Condition: New Price: Price Upon Request
view details
For Sale: Offshore Slick Line Kit 10 Kpsi
3 UNIT SLICK LINE – MODEL SLIMLINE 6931035300V01 WPCE’S EQUIPMENT FOR WP 10 KPSI • 3 unit- Bop 10 Kpsi - ID 5.1/8"; upper connection Ø9" - 4 Elmar box; Lower connection Ø 9" - 4 Elmar pin. • 3 unit- Lubricator 10 kpsi - ID 5.1/8" Length 20'; upper connection Ø6.1/8" - 4 Elmar box; Lower connection Ø9" - 4 Elmar pin. • 3 unit- Lubricator 10 kpsi - ID 5.1/8" Length 8'; upper connection Ø 9" - 4 Elmar box; Lower connection Ø 9" - 4 thd Elmar pin • 18 unit- Lubricator 10 kpsi - ID 4.1/16" Length 8'; upper connection Ø 6.1/8" - 4x2 Elmar box; Lower connection Ø6.1/8" - 4 thd Elmar pin • 3 unit- Sub Test 10 Kpsi - Ø 4.1/16" • 3 unit- Quick Test Sub 10 Kpsi - Ø 5.1/8" • 11 unit- Side Entry Sub 10 Kpsi - Ø 4.1/16" • 11 unit- Tool Catcher 10 Kpsi - Ø 1"x1.3/4" • 22 unit- Stuffing Box 10 kpsi - Ø 6.1/8" • 11 unit- Test CAP 10 Kpsi - Upper Test CAP (Combined Quick Union Test Plug / Lift Bail Assembly) Ø 6.1/8"- 4 Elmar pin. • 11 unit- Test CAP 10 Kpsi - Upper Test CAP (Quick Union Test Cap Assembly) Ø 6.1/8"- 4 Elmar pin. • 11 unit- Test CAP 10 Kpsi - Lower Test CAP (Quick Union Test Cap Assembly With lower connection NPT 1/2 ") Ø 6.1/8"-4 Elmar box. • 3 unit- Test CAP 10 Kpsi - Upper Test CAP (Combined Quick UnionTeste Plug / Lift Bail Assembly) Ø 9"-4 Elmar pin. • 3 unit- Test CAP 10 Kpsi - Lower Test CAP (Quick Union Test Cap Assembly) Ø 9"-4 Elmar pin. • 6 unit- Lubricator dolly – 3 unit of Ø 5.1/8" and 3 unit of Ø4.1/16" • 3 unit- Stuffing Box Sheave 16". • 6 unit- Composite Rigging Sheave 16" • 13 unit- Pump Enerpac: 3 unit of 3 Kpsi; 7unit of 6,5 Kpsi; 3 unit of 10 Kpsi; • 10 unit- Hose. Quantity -7 unit 1/4" 6 Kpsi with 1,71meters; 3 unit 1/4" 10 K psi with 7,75meters SLING • 3 unit- Two-legged sling with 5.50 meters • 2 unit- Two-legged sling with 2.50 meters BHA EQUIPMENT • 54 unit- Stem / Sinker Bars 1.1/2" X 2', 1.1/2" X 3', 1.1/2" X 5', 1.7/8" X 2', 1.7/8" X 5', 2.1/8“ X 2’ , 2.1/8“ X 3’, 2.1/8“ X 5’, 1.7/8" X 3', 2.1/8“ X 2’ • 6 unit- Hydrostatic Bailer 1.500", 2.125" • 6 unit- Dump Bailers 1.500", 2.125", 2.620". • 6 unit- Fluted Centralizers OD 2.72" - DN 3", 3.54" - DN 4", OD 2.72" - DN 3" ,OD 3.54" - DN 4" • 42 unit- Lead Impression Blocks 1.500 ",1.750", 2.000", 2.250",2.500", 2.625", 2.750"2.875", 3.250", 3.500", 3.593", 4.750". • 12 unit- Tubing Gauge Cutters 1.900", 2.220", 2.750", 3.460" • 45 unit- Knuckle Joints 1.1/2" , 1.7/8" ,2.1/8" . • 36 unit- Blind Boxes 1.625", 1.750", 2.000", 2.250", 2.625", 2.750", 2.860", 3.250", 3.500",3.593", 3.780", 3.850". • 18 unit- Bowen Tubular Jars 1.1/2" X 30", 1.7/8" X 30", 2.1/8" X 30",1.1/2" X 30". • 15 unit- Running & Pulling Tool: GS 2", GS 2.1/2", GS 3" ( core w/ thread 1.1/16" UNSI), GS 3 1/2", GS 4". • 6 unit- Sliding Sleeve with no go: 3.62" (nipple 3.56")- 4 m x ID 3", 3.72". (nipple 3.68") 4 m ID 3" . • 30 unit- Slips GS 2.00",GS 2.50", GS 3.00, GS 3.00", GS 3.50",GS 4.00". • 3 unit- Wireline Scratchers 1.1/2" (With wire holes 0.092"). • 3 unit- Cross Over1.1/16" UNS pin X 1.7/8''" QLS box • 8 unit- Cross Over1.1/16" QLS pin X 15/16" UNS CX. • 9 unit- Cross Over1.1/2" QLS pin X 15/16" UNS CX. • 3 unit- Cross Over 1.1/2" QLS pin X 1.7/8" QLS CX. • 9 unit- Cross Over 1.7/8" QLS pin X 1.1/16" UNS CX. • 3 unit- Cross Over 1.7/8" QLS pin X 1.1/2" QLS CX. • 9 unit- Cross Over 15/16" UNS pin X 1.1/16" UNS CX. • 6 unit- Shock Absorbers 1.7/8", 2-18"....
Location: Macaé - Rio de Janeiro Date Posted: Thursday, June 08, 2017
Condition: New Price: Price Upon Request
view details
For Sale: Nitrogen Generating Unit - PCI
Three Nitrogen Generating Unit (from now on referred to as NGU), model number C750/500HPNGU-96/99-ZII-5000 manufactured by Pacific Consolidated Industries, LLC. This diesel driven High Pressure Nitrogen Generating Unit (HPNGU) continuously produces 96/99% pure, dry gaseous Nitrogen at a flow rate up to 750 SCFM (21 SCMM) / 520 SCFM (15 SCMM), at a working pressure of 5000 PSIG (345 Bar). The NGU uses an Atlas Copco twin screw feed air compressor. The compressor draws ambient air and delivers pressurized after-cooled air to a series of water, oil and particulate filters, and separators. Cleaned dry air passes through air separation membranes producing high purity nitrogen. The nitrogen gas passes through metering and flow devices before entering a reciprocating booster compressor. The booster increases the nitrogen gas pressure for final discharge out the side of the compressor container. The NGU has the following major components: FEED AIR COMPRESSOR MODULE Compressor: - Atlas-Copco, XRO 1550 -The rotary screw type compressor delivers after-cooled feed air. Air is compressed to approximately 360 psig @ 1550 scfm (25 bar @ 44 scmm). Drive: CAT C-32 ACERT diesel engine with Pyroban and 3GP system BUNDLE BOX MODULE Filtration & Separation: The filtration is two coalescing filters, a carbon filter and a particulate filter. The separation is 25 membranes separating nitrogen from other gases. BOOSTER MODULE Booster: Hurricane, PB9-64/5000 -The four-stage reciprocating compressor delivers up-to 750 scfm @ 5000 psig (21 scmm @ 345 bar). Drive: CAT C-9 ACERT diesel engine with Pyroban and 3GP system ...
Location: Macaé - Rio de Janeiro Date Posted: Friday, May 26, 2017
Condition: Good - Used Price: Price Upon Request
view details

>> Do you have surplus equipment to sell?  Post an ad on Rigzone.com and start receiving leads today.


Davis Rig Equipment Inc.           Equipment Trading International BV

PROCEGAS, LLC           Oilfield Swivel Repair

Pickett Oilfield, LLC           Global Drilling Support Int

Freemyer Industrial Pressure           SRG International, LLC

MasterRig          
view all featured companies
become a featured company
Events  SUBSCRIBE TO OUR NEWSLETTER

Our Privacy Pledge
SUBSCRIBE